|
|
141002 Wire Forms Galvanized Aero Space
|
206001 Wire Forms S-Hooks Lifting
|
115001 Wire Forms Galvanized Hooks
|
113001 Wire Forms Handles
|
116001 Custom Wire Forms with Top Loop
|
120002 Wire Forms Bent S Hook
|
151001 Wire Forms Conveyor Hooks
|
159001 Wire Forms Custom Paint Hooks
|
177004 Wire Forms Holders
|
180001 Wire Forms S Hooks Plated Steel
|
210001 Wire Forms Hooks with Loops
|
235001 Custom Galvanized Wire Forms
|
368067 Wire Forms Grip Clip
|
436001 Wire Forms Hangers
|
439002 Tight Loop Wire Forms
|
545001 Wire Forms Conveyor Hooks with Loops
|
Custom wire forms and custom hooks (s hooks or c hooks, etc) are a mission that Marlin Steel Wire Products performs
exceptionally well. We design and engineer custom steel hooks and wire forms in stainless steel or plain steel. We make tens of thousands (sometimes hundreds of thousands) of
custom steel wire forms and hooks each week.
Typically people submit to us a part (in a pdf or by fax or an actual sample) and ask us to “make it fast.” Typically requirements like the weight load, finish,
critical dimensions and quantity needed are helpful for quoting and preparing prints.
Marlin will submit a quote and upon receipt of a purchase order, Marlin will generate precise auto cad prints that will detail the front view of the wire form, the side view (if
three dimensions), top view (if three dimensions) and an isometric view (as if you were standing over the wire form near the corner if it is three dimensional). If it will help
you, we can depict your wire form mating with another part. Upon receipt of the print, you will confirm that the wire form print will meet your requirements.
Upon print approval, we will release to travelers to our factory floor to the machine centers that will contribute to the fabrication of your hook or wire form. The bending
department will fabricate your parts off of two dimensional or three dimensional robots optimally suited for repeatable precise parts. If necessary, we can utilize aluminum
fixtures on robots that will weld (resistance or mig depending on the application) the parts consistently. For example our robotic mig welder will weld parts with a tolerance of
+/-).003” in a “x” plane and a “y” plane and a “z” plane. The mig welder will be the ultimate quality checker of your parts.
Once the parts are welded we pack them securely and ship raw or we can finish the hook or wire form. Typical finishes we provide include electropolish (for stainless), nickel
plating, chrome plating, epoxy coating, powder coating, plastisol pvc coating, nylon coating and galvanizing.
If you have any questions or you would like to send a print, please fax it to 410-644-7457 or
contact us.
|
